Welcome To The Casa Fiora Window Planner
Planning your draperies online is a cinch with our step-by-step process. Our aim is to give you exactly the custom effect you want, which is why our process is incredibly thorough. By the time you fill in the blanks, you'll have all the information you need to take to your Casa Fiora retailer and order your new draperies. Pricing will be provided by the retailer or designer.
|
Floor Length |
Trouser Break |
Full Puddle |
A special Fiora styling tip:
Fiora recommends using a puddle for decorative, pleated draperies only. For tiered or sheer draperies, we recommend floor length or trouser break.
Off Window |
Covering Casing /Trim |
Hanging Into the Window Pane |
A special Fiora styling tip:
If you want your draperies to look fuller, select operable even if you don't intend to close your draperies. A single width is also fine for decorative draperies. Remember, there are no rules! It all depends on your taste.
|
Please note that our draperies have standard 3.5 ” returns. You will not be able to return your draperies to the wall if using projected or double brackets. If you require a deeper panel return, please contact Casa Fiora Customer Service to discuss options. |
A special Fiora styling tip:
Consider returning your draperies to the wall for better insulation and control of sunlight streaming in.
Our decorative fabric-covered buttons provide dressmaker detailing to your draperies. Fabric-covered buttons are available for Goblet and French pleat draperies only. Buttons are not available for Sheers or Outdoor Panels.
French Pleat |
Parisian Pleat |
Goblet Pleat |
Monaco Pleat |
Laurel Pleat |
Cartridge Pleat |
Basic Rods |
Waterfall Rods |
Grommets |
|
Floor Length |
Trouser Break |
Full Puddle |
Off Window |
Covering Casing /Trim |
Hanging Into the Window Pane |
A special Fiora styling tip:
If you want your draperies to look fuller, select operable even if you don't intend to close your draperies. A single width is also fine for decorative draperies. Remember, there are no rules! It all depends on your taste.
|
Please note that our draperies have standard 3.5 ” returns. You will not be able to return your draperies to the wall if using projected or double brackets. If you require a deeper panel return, please contact Casa Fiora Customer Service to discuss options. |
A special Fiora styling tip:
Consider returning your draperies to the wall for better insulation and control of sunlight streaming in.
|
Casa Fiora |
COM |
|
|
Our decorative fabric-covered buttons provide dressmaker detailing to your draperies. Fabric-covered buttons are available for Goblet and French pleat draperies only. Buttons are not available for Sheers or Outdoor Panels.
Hardware should add the perfect emphasis to your draperies and blend artfully with your decorating style. In Fiora's eyes, it's yet another chance to create fashion and flair.
When you choose hardware from Casa Fiora, you can be sure it will work with any of our fabrics. Plus, it will simplify the measuring process, since we already know all the specifications.
Of course, you're welcome to use any other hardware you desire, and when it's time to take measurements, we'll give you all the guidance you need.
What's most important is that you have exactly what you want.
High - Almost reaching the ceiling. | |
Midway - Half-way between the ceiling and the top of the window casing. | |
Low - Just above the window casing. |
inches | I want to place my rod in a specific location. Measure distance from floor to center of rod. |
Yes | No |
Measure from the floor to the bottom of the molding.
inches |
Measure from the floor to the ceiling.
inches |
inches |
Measure inside jamb to jamb. |
Measure from the outside of the casing/trim on one side to the outside of the casing/trim on the other side.
|
inches | inches |
If using a traditional rod with rings that will hold our drapery hooks or a traverse rod with faux rings, measure from the floor to the bottom of the rings. | If using a traverse rod, measure from the floor to the bottom of the rod for pleated draperies. |
inches |
Measure from the floor to the centerline of the rod for rod pocket draperies. | |
inches |
Please indicate if the drapery rod for your rod pocket draperies is small diameter (approximately 1") or large diameter (approximately 2 - 2 1/4"). |
Measure from the floor to the centerline of the rod for grommet draperies. | |
inches |
A special Fiora styling tip:
|
Measure the space from inside of bracket to inside of bracket. | Measure inside jamb to inside jamb (the jamb is where the window panes meet the encasing wall or woodwork). | Measure from the outside of the casing/trim on one side to the outside of the casing/trim on the other side. |
inches | inches | inches |
Printed on: | Design Decisions: | ||
User: | Hardware Decisions | ||
Measurements |
Window Type: | |
Obstructions: |
Drapery Style: | |||
Drapery Style Dual: | |||
Fabrics: | |||
Fabrics Dual: | |||
Side Styling: | |||
Side Styling Dual: | |||
Lining: | |||
Lining Dual: | |||
Return: | |||
Return Dual: | |||
Top Styling: | |||
Top Styling Dual: | |||
Bottom Styling: | |||
Bottom Styling Dual: | |||
Covered Buttons: | |||
Covered Buttons Dual: |
Hardware Collection: | |||
Finial: | |||
Bracket: | |||
Finish: | |||
Holdback: | |||
Rod Placement: |
Floor To Casing: | ||
Inside Jamb: | ||
Outside Casing: |
Operable | Non-Operable | |
Rod Height* | ||
Rod Length | ||
Panel Length | ||
Panel Length Dual-Rod | ||
Panel Width | ||
Panel Width Dual-Rod |
Operable | Non-Operable | |
Total Rings required: | ||
Total Rings required Dual-Rod: | ||
Rings included with ensemble: | ||
Rings included with ensemble Dual-Rod: |
Enter your Zip Code to find the closest Casa Fiora dealer: